SHPAVVER ZKS-001 Vacuum Beard Trimmer User Manual

This product uses a TYPE-C charging cable.
You can use a phone charger with a 5V/1A adapter, or charge it using the USB port in a car or computer.
If the charging cable is damaged, please replace it with a new one to avoid danger.
The product should be charged and stored between 5°C and -35°C.
Make sure both the charger and the charging cable are dry. Do not plug or unplug the device with wet hands to avoid an electric shock.
Before use, check whether the blade and comb are damaged or deformed to prevent injury to the skin.
Clean the shaver with clean water, but do not immerse the product in water.
Do not use saltwater, hot water above 60 °C, thinners, gasoline, alcohol, or other chemicals to clean the electric shaver.
During use and charging, the electric shaver may become slightly warm. This is normal; please feel free to use it.
Do not place the electric shaver in direct sunlight or near other heat sources.

PARTS LIST

Electric Shaver
Facial Hair Comb l1~10mm)
Beard Comb l10-20mm)
USB Charging Cable
User Manual
Small Cleaning Brush

PRODUCT INTRODUCTION

CHARGING GUIDELINE

Charging

When the display screen indicates a remaining battery level of ’05’, the battery level icon will start to flash as a reminder to initiate the charging process. Once fully charged, the display will show·–‘.
Insert one end of the charging cable into the electric shaver, then connect the other end to a charger with a 5V/1A output, or alternatively, plug it into a computer or car USB port with a 5V1 A output.
Upon connecting to a power source, the display screen will illuminate, and the rolling numbers on the screen will increment as the charging duration extends, indicating that the device is actively charging.
A complete charge cycle typically requires approximately 2 continuous hours. Upon full charge, the display will show·–·. This indicates that the electric shaver is fully charged and is ready for approximately 90 minutes of use.

FEATURE OVERVIEW

Comb Adjustments

Facial Hair Comb
As illustrated, the facial hair comb has an adjustable range of 1-10mm. Its center-notch design aids in the efficient removal of facial hair. The comb’s beveled teeth are designed to avoid any obstruction around the nose area during use.

Beard Comb
As depicted, the beard comb has an adjustable range of ’11-20mm’. The comb features open-toothed edging to facilitate better grooming of the beard during the trimming process.

Comb Size Adjustment Button
As shown, this product’s adjustment button operates through a rotating wheel mechanism for effortless fine-tuning. Each increment during adjustment corresponds to 1 mm. The outer scale, marked ‘1-10mm’, pertains to the facial hair comb readings, while the inner scale ’11-2 mm’, applies to the beard comb measurements.

Vacuum Hair Collection Functionality

Vacuum Suction
This device offers dual-setting vacuum suction capabilities, providing strong suction force with minimal noise. During the trimming process, hair is collected into the hair storage chamber, which can be easily cleaned after use.

Jamming Protection
This product features a built-in jamming protection mechanism. In instances where the blade becomes entangled with hair, the device will automatically shut down to maximize product protection. To resume operation, simply restart the device.

Digital Display

Battery Level Indicator
This product is equipped with a battery level display. During use, a countdown is visible, ranging from ‘–‘ to ·99· to ·o·. When the battery level reaches ’05, it starts to flash as a reminder to charge the device. A fully charged battery is indicated by ‘ –‘.

Travel Lock
The travel lock feature prevents accidental activation due to vibrations while traveling. To enable or disable the travel lock feature, press and hold the power button for 3 seconds.

Cleaning Reminder
After 5 minutes of continuous operation, a cleaning reminder icon will illuminate on the display, prompting the user to clean the hair storage chamber.

Overvoltage Protection
The device’s chipset includes an overvoltage protection feature. Should the charging voltage exceed the preset levels, both the plug and exclamation mark icons on the display will illuminate simultaneously before turning off after 3 seconds.

OPERATING STEPS

Attach the Appropriate Comb
Choose a suitable comb for your grooming needs and attach it to the device. Adjust the rotating wheel to the desired length. Note that the two available combs offer distinct functionalities and sizes, and selecting the appropriate one can optimize hair removal efficiency.

Power On
Press the power button to activate the electric shaver.

Linear Movement Along the Blade Direction
Guide the vacuum beard trimmer in a straight line along the direction of the blade while in contact with the skin.

Post-Trimming Procedure
After completing the hair trimming, remove the comb. Use your thumb to eject the cover of the hair storage chamber. Empty the contents of the hair storage chamber into a waste bin. The chamber can be rinsed under a tap; once rinsed, please ensure the chamber is dried before reattaching the cover to its original position.

Caution: Do not use any damaged shaver heads, as this could lead to skin injury. Should you encounter a damaged shaver head, immediately replace it with our original spare shaver heads.

CLEANING AND MAINTENANCE

Before cleaning, ensure to disconnect the vacuum shaver from the charging cable and turn off the device.
The shaver head can be easily disassembled by hand.
This device has an IPX6 water resistance rating and can be washed directly under running tap water; however, do not submerge the device in water.
After washing, drain any excess water, place the device horizontally, and allow it to air dry.

SHAVER HEAD REPLACEMENT
For an optimal user experience, it is advisable to replace the shaver head at least every 6-8 months. Barring any damage due to external factors, the shaver is designed for a prolonged lifespan. Only original manufacturer shaver heads should be used for replacements in case of any damage.

CUSTOMER SERVICE

We proudly offer a hassle-free 1-year warranty along with lifetime dedicated customer support I Should you encounter any issues, please reach out to us either through the Amazon “Contact Seller” channel or via email from our after-sales department mentioned below. We are committed to providing you with impeccable service and guarantee a 100% satisfactory resolution.
Have any questions? Please reach out to us first.
Contact Seller
Email: support@shpavver.com

Manufacturer

Company Name: Ningbo Ningwan Electric Appliance, Ltd
Address: No. 109, Hengtan, Cao Yi Village, Xiao Cao’e Town, Yuyao City, Zhejiang Province.China
Contact Person: Zhang Zhenlii
Email: support@shpavver.com

FREQUENTLY ASKED QUESTIONS

What is the standout feature of the SHPAVVER ZKS-001 Vacuum Beard Trimmer for men?

The SHPAVVER ZKS-001 includes a built-in vacuum system that captures trimmed hair into an internal compartment, keeping your sink and bathroom clean.

Is the SHPAVVER ZKS-001 Beard Trimmer waterproof?

The SHPAVVER ZKS-001 is IPX7 waterproof, which makes it suitable for both wet and dry shaving.

Can I use the SHPAVVER ZKS-001 Vacuum Beard Trimmer to trim sideburns and mustaches?

Absolutely. The SHPAVVER ZKS-001 is designed for beards, sideburns, and mustaches, offering versatility for various facial hair styles.

How many trimming length settings does the SHPAVVER ZKS-001 Beard Trimmer offer?

The SHPAVVER ZKS-001 provides 20 different trimming lengths via adjustable combs and knob calibration, offering full customization.

What kind of battery performance does the SHPAVVER ZKS-001 Vacuum Trimmer offer?

It features dual motors and delivers over 90 minutes of runtime on a full charge, suitable for home and travel use.

How is the SHPAVVER ZKS-001 Beard Trimmer charged?

The SHPAVVER ZKS-001 can be charged through a USB port or power adapter, making it ideal for on-the-go use, such as travel or business trips.

What makes the SHPAVVER ZKS-001 suitable as a gift?

Its sleek, modern design and high performance make the SHPAVVER ZKS-001 an excellent gift for fathers, husbands, boyfriends, or sons.

VIDEO – PRODUCT OVERVIEW

DOWNLOAD THE PDF LINK: SHPAVVER ZKS-001 Vacuum Beard Trimmer User Manual

References

User Manual

SHPAVVER ZKS-001 Vacuum Beard Trimmer

SPECIFICATION